當前位置：打膠機膠粘劑強度跟哪些因素有關
時間：2017-08-22 來源：http://www.lingmaicnc.com/ 發布人：昌盛機械
雙組份打膠機膠粘劑的物化性能測試一是對膠液的均勻性、狀態、顏色和是否有雜質(外觀測試)。二、可以用密度瓶測定液態膠粘劑的密度是多少(密度測試)。三用涂-4粘度計(秒)和旋轉粘度計(Pa.S)進行測試黏度是多少(黏度測試)。四、研究膠粘劑固化條件的重要數據(固化速度測試)。
The physical and chemical properties of the adhesive for two-component adhesive machine are tested, one is the uniformity, the state, the color and the impurity (the appearance test) of the glue. Two, the density bottle can be used to determine the density of liquid adhesives (density test). Three using -4 viscometer (seconds) and rotational viscometer (Pa.S) to test the viscosity (viscosity test). Four. Study the important data of curing conditions (curing rate test).
膠接強度跟哪些因素有關?
What are the factors associated with bonding strength?
1)膠粘劑主體材料的結構、性質和配方;2)被粘物的性質與表面處理;3)涂膠、膠接和固化工藝有關;4)膠接頭的形式、幾何尺寸和加工質量;5)強度測試的環境如溫度、壓力等;6)外力加載速度、方向和方式等。
1) structure, properties and adhesive formulation main material; 2) by nature and surface treatment of adhesive material; 3) coating, adhesive and curing process; 4) form, geometric dimensions and processing quality of adhesive joints; 5) strength test environment such as temperature, pressure and so on; 6) external loading speed, direction and way.
雙組份打膠機批發
溫度影響硅膠點膠機膠水的粘稠度和速度，在硅膠點膠機的工作中是一個非常重要的參數，點膠膠水在不用的時候一般存儲在冰箱中，使用之前半小時左右拿出來。
The influence of temperature on silica gel dispenser glue viscosity and velocity in silicone dispensing work is a very important parameter, dispensing glue when not in use are normally stored in the refrigerator, take out half an hour before use.
膠水的粘度對于電教質量的影響是十分大的，粘度過大，可能導致拉絲現象;多小的話，可能導致身染焊盤，所以選擇合適的濃度對于硅膠點膠機的工作是十分重要的。在硅膠點膠機的使用過程中會遇到各種各樣的問題，但是只要你提前做好準備，了解硅膠點膠機的性能和參數，就一定可以解決的。
The viscosity of glue for teaching quality is very high, the viscosity is too large, may cause the phenomenon of drawing; small words, may lead to body dye pad, so select the appropriate concentration is very important for silicone dispensing work. In the use of silicone dispenser, will encounter a variety of problems, but as long as you are prepared in advance to understand the performance and parameters of silicone dispenser, you can certainly solve.
膠水在使用的時候溫度應該控制在24攝氏度左右;另外，環境的溫度也對膠水有很大的影響，據測試表明，環境溫度差5攝氏度的話，就會造成一半的點膠量變化，硅膠點膠機所以環境溫度的控制也是十分重要的。
The glue temperature should be controlled at 24 degrees Celsius when in use; in addition, the environmental temperature has great effect on the glue, according to the test showed that the environmental temperature of 5 degrees Celsius, the change will result in half of the dispensing, dispensing machine so silica gel temperature control is also very important.
本文的精彩內容來自雙組份打膠機詳細內容請點擊我們的官方網站: http://linshi.jncsjx.com/ 謝謝您的到來!
The exciting content of this article comes from the two component dispenser, please click on our official website: http://linshi.jncsjx.com/, thank you for coming!
- 丁基膠涂布機液壓油的選擇指南 2025/10/31
- 玻璃涂布機設備操作流程 2025/10/30
- 雙組份打膠機比例怎么調 2025/10/29
- 全自動鋁條折彎機折彎角度偏差的解決方法 2025/10/29
- 中空玻璃丁基膠涂布機漏油怎么解決 2025/10/28
- 臥式丁基膠涂布機糾偏原理 2025/10/27
- 立式丁基膠涂布機故障維修 2025/10/25
- 全自動丁基膠涂布機怎么換膠 2025/10/24
- 丁基膠涂布機液壓系統油路原理 2025/10/23
- 全自動中空玻璃封膠線的設備特點 2025/10/22
產品分類Product categories
聯系我們Contact us
- 咨詢熱線：0531-85717458 13705446998
- 公司地址： 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們：
